Configuring Edge for Hyperion 1300 Scanner


The Edge comes configured for the Hyperion 1300g by default. However, if you need to change your 
configuration:

  1. In The Edge, click on Administrative > Configuration.
  2. From the BarcodeScannerSettings area, select ScannerType.
  3. Select STX_ETX from the drop-down menu on the right.
  4. Click OK to save your changes.

 

Updated on Wed, 14 Jul 2021 by Angela Chiaravalle

Glad we could be helpful. Thanks for the feedback.

Sorry we couldn't be helpful. Your feedback will help us improve this article.

How helpful was this page?